Advertisement
Function name
Button name Description
User:
USER1 to
User 1 to User 8
USER8
–
ALL
c Operation buttons
Button name
Description
UNDO
After recalling a register, returns to
the state before the register was
recalled.
STORE STATS
Lights up amber when an effect
timeline/snapshot/shotbox/macro
is saved in a register.
While the [STORE STATS] button
is lit amber, you can press and
hold the [STORE STATS] button
and press the [UNDO] button to
return to the state before saving.
TC
Switches to timecode input mode.
STORE
Switches to the mode for saving an
effect timeline/snapshot/shotbox/
macro.
In save mode, the [STORE] button
is lit amber.
RCALL
Switches to the mode for recalling
an effect timeline/snapshot/
shotbox/macro.
In recall mode, the [RCALL] button
is lit amber.
d Numeric keypad
Use to enter numeric values and to add an effect timeline/
snapshot attribute. Entered numeric values appear on the
display.
It is also used to enter numeric values in conjunction with
setting parameters in the device control block, setting the
transition rate in the utility/shotbox control block, and
other tasks.
Button name
Description
0 to 9
Enters numeric values.
. (period)
• Enters a decimal point.
• In timecode input mode, "00" is
entered.
• In effect timeline operation mode
and snapshot operation mode,
use to search for an empty
register.
Button name
User regions
+/–
EFF DISS
Select all regions
configured
beforehand
If you press the
[ALL] button while
CLR
a region is
AUTO TRANS
selected, all
regions are
deselected.
TRIM
GPI ENBL
ENTER
The [GPI ENBL] button function is not supported.
e Display
The following information is displayed.
• Left-side display (lines 1 to 3) and right-side display
• Right-side display (lines 3 to 4):
38
Description
• Inverts the + (plus) and
– (minus) signs.
• In effect timeline operation mode
and snapshot operation mode,
use to add the effect dissolve
attribute.
• Deletes the entered numeric
value.
• In snapshot operation mode,
use to add the auto transition
attribute.
Use when entering difference
values.
Enter a numeric value and press
the [TRIM] button to increase/
decrease a setting value.
• Confirms the entered numeric
value.
• For a register number, executes
a register recall/save.
Note
(lines 1 to 2):
Selected region names (reference region is highlighted)
Register numbers, reference region name, numeric
values entered in the numeric keypad, and other items
Advertisement
Chapters
