Flexi Pad Control Block - Sony XVS-G1 User Manual

Flexi Pad Control Block

The Flexi Pad control block is used for recalling and
saving snapshots, wipe snapshots, DME wipe snapshots,
and key snapshots, for recalling and creating macros, for
recalling shotboxes, for entering the transition rate, and
for other tasks.
a
a Mode selection buttons / operation buttons / bank
selection buttons (assignable buttons)
You can assign mode/bank selection buttons and
operation buttons in the Home > Setup > Panel > Module
> Button Assign menu (19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 397).
Mode selection buttons
Function Button name
name
Key KEY
b
Description
Switches to key operation
mode.
In key operation mode,
you can carry out the
following operations.
• Saving and recalling key
snapshots
• Selecting independent
key transition type
• Selecting the key fill
signal or key source
signal in the cross-point
control block
Function Button name
name
Wipe WIPE
DME Wipe DME WIPE
Snapshot SNAPSHOT
Shotbox SHOTBOX
Macro MCRO
Transition Rate TRANS RATE Switches to transition rate
[UNDO] button / [DEL] button
Function Button name
name
Undo UNDO
Delete DEL
50
Description
Switches to wipe
snapshot operation mode.
In wipe snapshot
operation mode, you can
save and recall a wipe
snapshot and select a
wipe pattern.
Switches to DME wipe
snapshot operation mode.
In DME wipe snapshot
operation mode, you can
save and recall a DME
wipe snapshot and select
a DME wipe pattern.
Switches to snapshot
operation mode.
In snapshot operation
mode, you can save and
recall snapshots, and add
attributes.
Switches to shotbox
operation mode.
In shotbox operation
mode, you can recall and
execute shotboxes.
Switches to macro
operation mode.
In macro operation mode,
press and hold the
[MCRO] button and press
a button (for the target
register) in the memory
recall section to enter edit
mode.
In macro operation mode,
you can save, recall, and
edit macros.
operation mode.
In transition rate operation
mode, you can enter a
transition rate.
Description
After recalling a register,
returns to the state before
the register was recalled.
Press and hold the [DEL]
button and press a
register button in the
memory recall section to
delete the register data.