Sony XVS-G1 User Manual page 23

a Transition execution section
Transition indicator
Fader lever
Display
AUTO TRANS button
Name Description
Fader lever Move this up or down to execute a
transition.
You can press the [KF] button,
turning it on, to use the fader lever
as a keyframe fader.
Transition indicator Displays the transition progress
using LEDs.
Display Displays the transition rate.
[AUTO TRANS] Executes an auto transition with the
button set transition rate and transition
type.
During the transition, the button is
lit amber.
[CUT] button Executes an immediate transition.
b Display
The display shows the following information.
• Left-side display:
Target switcher bank name (M/E1 to M/E5, P/P)
Main and sub assignment status when in multi program
2 mode (MAIN, SUB, MAIN&SUB)
• Center display:
State (displayed highlighted when on) and priority of
key 1 to key 4
Main and sub assignment status when in multi program
2 mode (M, S)
• Right-side display:
State (displayed highlighted when on) and priority of
key 5 to key 8
Main and sub assignment status when in multi program
2 mode (M, S)
c Transition settings section (assignable buttons)
You can assign functions, such as selections and settings,
for transitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
CUT button
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 397).
Next transition selection buttons
Function Button
name name
Background BKGD
Key 1 to KEY1 to
Key 8 KEY8
Key Priority KEY
PRIOR
All ALL
Priority Set PRIOR
SET
Transition type selection buttons
Function Button
name name
Mix MIX
NAM NAM
Super Mix SUPER
MIX
Preset Color PST
Mix COLOR
MIX
Wipe WIPE
DME Wipe DME
WIPE
FM 1&2 Clip FM1&2
to FM 15&16 CLIP to
Clip FM15&16
CLIP
Wipe direction selection buttons
Function Button
name name
Normal NORM
Normal/ NORM/
Reverse REV
23
Description
Switches the background for a
next transition.
Inserts or removes the selected
key for a next transition.
The key is inserted if a key is
currently not inserted, or
removes the key if a key is
currently inserted.
Changes the key priority for a
next transition.
When the [PRIOR SET] button
is lit, the setting for key priority
after the transition is used.
Selects multiple next transitions
simultaneously.
Sets the key priority.
Description
Selects mix.
Selects NAM (non-additive
mix).
Selects super mix.
Selects preset color mix.
Selects wipe.
Selects DME wipe.
Selects clip transition.
Description
The wipe proceeds in the
direction from black to white of
the pattern images, shown in
"Wipe Pattern List" (page 456),
or in the direction of the arrows
(normal).
The wipe direction alternates
between normal and reverse
after each transition.