Advertisement
System signal format
(frequency)
1080i
(50)
a) Only the first number input in each group of four inputs can be set. The
settings of the inputs in each group are linked and change accordingly.
1
Open the Home > Setup > System > Input > FC
Format menu (19101.32).
2
Select the target input to set.
To select and set multiple inputs, place a check mark
beside the target inputs to set.
To select and set all inputs, place a check mark in the
Select All checkbox.
3
Press the [FC Format] button and select an input
signal format from the pull-down list.
Adjusting the conversion method
The conversion method adjustment items and the target
conversion formats are given below.
Adjustment item
Up-converter conversion mode
I/P converter conversion mode
Up-converter aspect ratio
1
Open the Home > Setup > System > Input > FC
Adjust menu (19101.33).
2
Select the target input to set.
To select and set multiple inputs, place a check mark
beside the target inputs to set.
To select and set all inputs, place a check mark in the
Select All checkbox.
3
Adjust the conversion method.
To set the up-converter conversion mode
Press the [Conversion] button and select a conversion
mode from the pull-down list.
Frame: Conversion in frame units
Field: Conversion in field units
Adaptive: Detects motion in the signal, and
automatically switches mode between conversion in
frame units and field units.
When [Adaptive] is selected, press the [Motion] button
and enter a detection sensitivity (1 to 4) in the numeric
keypad window.
Signal format of input
signal
576i
720P
1080i
Conversion format
• 480i t 1080i
• 576i t 1080i
• 1080i t 2160P
• 1080i t 1080P
• 480i t 1080i
• 576i t 1080i
1: Highest proportion converted from frames (still image
priority mode).
2: Higher proportion converted from frames.
3: Higher proportion converted from fields.
4: Highest proportion converted from fields (motion
priority mode).
To set the I/P converter conversion mode
Press the [Conversion] button and select a conversion
mode from the pull-down list.
Frame: Conversion in frame units
Field: Conversion in field units
Adaptive Y: Detects motion in the luminance signal, and
automatically switches mode between conversion in
frame units and field units.
Adaptive Y/C: Detects motion in the luminance signal
and chrominance signal, and automatically switches
mode between conversion in frame units and field
units.
When [Adaptive Y] or [Adaptive Y/C] is selected, press
the [Motion] button and enter a detection sensitivity (1 to
4) in the numeric keypad window.
1: Highest proportion converted from frames (still image
priority mode).
2: Higher proportion converted from frames.
3: Higher proportion converted from fields.
4: Highest proportion converted from fields (motion
priority mode).
To set the up-converter aspect ratio
Press the [Aspect] button and select an aspect ratio from
the pull-down list.
Edge Crop: Add black bars on the left and right sides of
a 4:3 image to convert it to a 16:9 image.
Letter Box: Crop the top and bottom of a 4:3 image to
convert it to a 16:9 image.
Squeeze: Stretch a 4:3 image horizontally to covert it to
a 16:9 image.
Image before conversion
(4:3)
370
Image after conversion
(16:9)
Edge Crop
Letter Box
Squeeze
Advertisement
Chapters
