Figure 4-45. Installing The Floppy Disk Blank And Bracket; Figure 4-46. Tightening The Bracket Screws - HP Visualize c3650 Supplementary Manual

field replaceable units
FRU removal and replacement

Figure 4-45. Installing the Floppy Disk Blank and Bracket

6. Slide the floppy disk blank and its bracket into the system unit chassis as shown in
Figure 4-45.
7. Tighten the two floppy disk bracket screws as shown in Figure 4-46..

Figure 4-46. Tightening the Bracket Screws

132
Floppy Disk
Mounting Screws
(four, T-10)
Bracket Screw
Floppy Disk
Bracket
Floppy Disk Blank
Bracket Screw
Bracket Screw
Chapter 4