Figure 4-38. Installing The Floppy Disk Drive; Figure 4-39. Tightening The Bracket Screws - HP Visualize c3650 Supplementary Manual

field replaceable units
FRU removal and replacement

Figure 4-38. Installing the Floppy Disk Drive

6. Slide the floppy disk and its bracket into the system unit chassis as shown in Figure
4-38.
7. Tighten the two floppy bracket screws as shown in Figure 4-39.

Figure 4-39. Tightening the Bracket Screws

8. Plug the data and power cables into their appropriate connectors. Note that the
connectors are keyed for proper insertion. See Figure 4-40.
128
Floppy Disk Drive Mounting
Screws (T-10 Torx Screws)
Floppy Disk Drive Bracket
Bracket Screw
Floppy Disk
Drive Front
Panel
Bracket Screws
Bracket Screw
(hidden)
Chapter 4