HP Visualize c3650 Supplementary Manual page 78

troubleshooting
selftest failures
Table 3-2. Chassis Codes for th HP Workstation C-Class
Ostat Code FRU
WRN C7F1 EXT IO
WRN C7F2 EXT IO
WRN C7F3 EXT IO
WRN C7F4 EXT IO
WRN C7F8 EXT IO
WRN C7FF <blank>
INI CB00 SYS BD
WRN CB01 SYS BD
WRN CB02 SYS BD
WRN CB03 SYS BD
WRN CB04 SYS BD
WRN CB05 SYS BD
WRN CB0A SYS BD
INI CB0B SYS BD
WRN CB0C SYS BD
78
Message
bad alt IPL read
bad alt IPL read
bad alt IPL read
bad alt IPL read
bad alt IPL read
launch IPL other
TOC initiated
no OS TOC vector
bad OS TOC addr
bad OS TOC code
bad OS TOC len
bad OS TOC chksm
prev TOC logged
branch to OS TOC
br OS TOC failed
Description
Cannot load IPL from non-primary boot
device--load address invalid.
Cannot load IPL from non-primary boot
device--file is not IPL image.
Cannot load IPL from non-primary boot
device--IPL image size invalid.
Cannot load IPL from non-primary boot
device--IPL entry point address invalid.
Cannot load IPL from non-primary boot
device--IPL image checksum failed.
Booting from a device other than the
primary boot path.
A Transfer of Control entered the
firmware TOC handler.
There is no TOC vector for the operating
system. Firmware will soft boot the
system.
The operating system TOC handler vector
is invalid. Firmware will soft boot the
system.
The operating system TOC handler is
invalid. Firmware will soft boot the
system.
The size of the operating system TOC
handler is invalid. Firmware will soft boot
the system.
The operating system TOC handler failed
the checksum test. Firmware will soft boot
the system.
Firmware detected unread PIM data from
a previous TOC and will not overwrite it.
(PIM for this TOC is lost.)
Branching to the operating system TOC
handler.
Branch to the operating system TOC
handler failed. Firmware will soft boot the
system.
Chapter 3