system unit fans
The HP workstation c-class has five fans that are used to cool various areas within the
unit. If one of these fans is not working, you will need to replace it to ensure no heat
damage is caused to the system unit. To replace a bad fan, you will need to follow one of
three sets of procedures that are covered in this section. The three procedures are:
• Removing the fan from the hard disk drive area
• Removing the fans from the CPU area
• Removing the fan and speaker from the I/O card area.
Figure 4-15. Fan Cooling Areas for the System Unit
I/O Card
Area
CPU
Area
Chapter 4
field replaceable units
FRU removal and replacement
Hard Disk
Drive Area
109
Need help?
Do you have a question about the Visualize c3650 and is the answer not in the manual?
Questions and answers