Operating System Overview - HP Visualize c3650 Supplementary Manual

operating system overview

This workstation uses the HP-UX operating system. To verify which version of the
operating system you are running, use the following command in a terminal window:
system name:$ swlist
If you're running HP-UX 10.20, the result from this command will be:
# Bundle (s):
B6193CA B.10.20.ACE.2
Instant Ignition systems (systems with preloaded software) have X-Windows,
Hewlett-Packard's graphical user interface, and HP CDE installed and configured.
If the Instant Ignition system does not have the kernel preconfigured with all of the device
drivers, you need to refer to the manual Managing Systems and Workgroups to configure
your kernel.
For problems or questions with Instant Ignition, refer to Using Your HP Workstation for
more information.
Note that both of the documents mentioned in the previous paragraphs can be found at the
following Uniform Resource Locator (URL):
http://www.docs.hp.com/
Chapter 1
Enter
Workstation ACE for HP-UX 10.20
product information
operating system overview
33