I/O Cards; Figure 2-4. Pci Card Slot Numbering And Capabilities - HP Visualize c3650 Supplementary Manual

Workstation c-class
Hide thumbs Also See for Visualize c3650:
Table of Contents

Advertisement

i/o cards

There are six I/O slots located on the rear panel of the HP workstation c-class. Slots 1
through 4 are full-size PCI slots. Slots 5 and 6 are half-size Peripheral Connect Interface
(PCI) slots. See Figure 2-4. for a brief description of slot capabilities.

Figure 2-4. PCI Card Slot Numbering and Capabilities

To maintain good graphics performance, you should always use slot 2 (SL2) as your
primary graphics card slot and slot 4 (SL4) as your secondary graphics card slot.
NOTE
If you connect your monitor to a different graphics card slot, you will need to
change the graphics path for that monitor. To do this see the section,
"Displaying and Setting the Monitor Type" in Chapter 6, Boot Console
Handler in this document.
See the section titled "i/o cards" on page 106 for details on installing I/O cards.
Chapter 2
configuration
FRU configurations
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Visualize c3750C3700 - workstation

Table of Contents