HP Visualize c3650 Supplementary Manual page 169

To set a system path to a new value, follow the directions in "accessing the boot console
handler" earlier in this chapter, and then type the following at the prompt and press
Main Menu: Enter command > path path_type path
where path_type is one of the path types listed in Table 6-1. and path is the specification of
the path in Mnemonic Style Notation (as described in Table 6-2.). For example, to set the
primary boot path to a SCSI disk with an ID of 6.0, follow the directions in "accessing the
boot console handler" earlier in this chapter, and then type the following at the prompt:
Main Menu: Enter command > path pri fwscsi.6.0
Chapter 6
boot console handler
displaying and setting paths
Enter
169
: