HP Visualize c3650 Supplementary Manual page 79

Table 3-2. Chassis Codes for th HP Workstation C-Class
Ostat Code FRU
WRN CB10 SYS BD
WRN CB11 SYS BD
WRN CB12 SYS BD
WRN CB13 SYS BD
WRN CB14 SYS BD
FLT CB1F SYS BD
WRN CB71 SYS BD
WRN CB72 SYS BD
WRN CB73 SYS BD
FLT CB9r IO BD
FLT CB99 SYS BD
FLT CB9A SYS BD
OFF CBA1 SYS BD
OFF CBA2 IO BD
OFF CBA3 SYS BD
OFF CBA4 IO BD
OFF CBA5 IO BD
Chapter 3
Message
LPMC initiated
icache LPMC err
dcache LPMC err
dcache tag error
dcache data err
OS LPMC failed
HPMC occurred
LPMC occurred
TOC occurred
Error on roper
seed IVA handler
HPMC overwrite
AIOC int dat err
EtoA rope perr
access invld TLB
EtoA rp cmd perr
CDF timeout
Description
A Low-Priority Machine Check entered
the firmware LPMC handler. The handler
should log the error and return to normal
operation.
An instruction cache parity error caused
the LPMC.
A data cache parity/ECC error caused the
LPMC.
The parity error is in the tag portion of
the data cache.
The parity error is in the data portion of
the data cache.
Firmware couldn't branch to the operating
system LPMC handler. It will halt the
CPU, requiring a power cycle to recover.
A High-Priority Machine Check caused
entry to PDCE_CHECK (the firmware
trap handler).
A Low-Priority Machine Check caused
entry to PDCE_CHECK (the firmware
trap handler).
A Transfer of Control caused entry to
PDCE_CHECK (the firmware trap
handler).
An error was detected on rope r.
PDC_SEED_ERROR triggered an HPMC.
Firmware is overwriting PIM data from a
previous HPMC.
I/O controller internal error.
Parity error between I/O controller and
Rope-to-PCI bridge.
An invalid I/O TLB entry was accessed.
Command parity error between I/O
controller and Rope-to-PCI bridge.
Rope Command/Data FIFO is backed up.
troubleshooting
selftest failures
79