Table of Contents
Advertisement
AQUATRAN Model 3/40 Operator's Manual
Chapter 8: Maintenance
This contains information on how to clean and maintain the AQUATRAN Model 3/40.
Read this chapter to learn about:
Cleaning the Instrument
•
•
Maintaining the Test Cells
•
Maintaining the Water vapor (Coulox) Sensor
•
System Standby
System Shutdown, Relocation and Storage
•
The following information will assist in the daily operation and maintenance of the AQUATRAN Model 3/40
system. Included are answers to the questions that are most commonly asked of the MOCON Technical
Services Group.
Cleaning the Instrument
The AQUATRAN Model 3/40 is housed in a textured stainless steel and plastic case that is easy to clean
and maintain. Periodically wipe the case with a damp cloth and mild detergent solution.
Warning!
Turn OFF the instrument and unplug it from its power source before beginning these
procedures. Failure to do so can result in electrical shock, which can cause injury or
death.
Some important precautions to follow:
Leave the instrument covers on while cleaning; do not get liquids in the instrument.
•
Never use alcohols or solvents on the plastic instrument case components. These chemicals
•
could damage the instruments as well as the case.
NOTE:
There are no user serviceable parts inside the AQUATRAN Model 3/40. A MOCON service
representative should perform all internal maintenance and adjustments.
MOCON, Inc.
Revision D
Maintenance
8-1
Advertisement
Table of Contents
