AQUATRAN Model 3/40 Operator's Manual
Maintenance
Figure 8-2: The Desiccant Chamber
System Standby
When a test series is complete, the instrument sets the sensor to the Bypass state. In this position the
sensor is isolated and protected from inadvertent exposure to large amounts of water vapor.
If no testing will be performed for an extended period of time (overnight or weekend), leave a sample
mounted and clamped in the test cells. Turning off the power and gas supplies to instrument is not
recommended. If instrument is shutdown you will need to wait for it to outgas before testing can resume.
MOCON, Inc.
Revision D
8-5