ABB Relion 650 Series Applications Manual page 236

Section 15
Basic IED functions
15.7 Product information PRODINF
15.7.1 Identification
Function description
Product information
15.7.2 Application
15.7.2.1 Factory defined settings
The factory defined settings are very useful for identifying a specific version and very helpful in the
case of maintenance, repair, interchanging IEDs between different Substation Automation
Systems and upgrading. The factory made settings can not be changed by the customer. They can
only be viewed. The settings are found in the local HMI under Main menu/Diagnostics/IED status/
Product identifiers
The following identifiers are available:
• IEDProdType
•
• ProductVer
•
• ProductDef
•
• SerialNo: the structure of the SerialNo is as follows, for example, T0123456 where
01
23
230
Describes the type of the IED (like REL, REC or RET). Example:
Describes the product version. Example:
1 is the Major version of the manufactured product this means, new platform of the product
2 is the Minor version of the manufactured product this means, new functions or new hardware
added to the product
3 is the Major revision of the manufactured product this means, functions or hardware is either
changed or enhanced in the product
Describes the release number, from the production. Example:
1 is the Major version of the manufactured product this means, new platform of the product
2 is the Minor version of the manufactured product this means, new functions or new hardware
added to the product
3 is the Major revision of the manufactured product this means, functions or hardware is either
changed or enhanced in the product
4 is the Minor revision of the manufactured product this means, code is corrected in the product
is the last two digits in the year when the IED was manufactured that is, 2001
is the week number when the IED was manufactured
© Copyright 2013 ABB. All rights reserved
IEC 61850 IEC 60617
identification identification
PRODINF -
1.2.3
1MRK 505 287-UUS B
GUID-2AF36251-BBC6-4674-BDA8-EF317F998409 v2
ANSI/IEEE C37.2
device number
-
REL650
1.2.3.4 where;
Busbar protection REB650
Application manual
M11789-39 v8