ABB Relion 650 Series Applications Manual page 134

Section 10
Control
10.2 Apparatus control
10.2.1 Identification
Function description
Bay control
Local remote
Local remote control
10.2.2 Application
The apparatus control is a function for control and supervising of circuit breakers, disconnectors,
and grounding switches within a bay. Permission to operate is given after evaluation of conditions
from other functions such as interlocking, synchronism check, operator place selection and
external or internal blockings.
Figure 48
Commands to an apparatus can be initiated from the Control Centre (CC), the station HMI or the
local HMI on the IED front.
IED
Apparatus
Control
CLOSE/OPEN
ANSI08000227 V1 EN-US
Figure 48: Overview of the apparatus control functions
Features in the apparatus control function:
128
The complete apparatus control function is not included in this product, and the
information below is included for understanding of the principle for the use of
QCBAY, LOCREM, and LOCREMCTRL for the selection of the operator place.
gives an overview from what places the apparatus control function receive commands.
Station HMI
Local
Local
HMI
HMI
IED
Apparatus
Control
CLOSE/OPEN
breakers disconnectors grounding switches
© Copyright 2013 ABB. All rights reserved
IEC 61850 IEC 60617
identification identification
QCBAY -
LOCREM -
LOCREMCTRL -
cc
GW
Station bus
Local
HMI
IED
Apparatus
Control
CLOSE/OPEN
ANSI08000227.vsd
1MRK 505 287-UUS B
GUID-7D680859-12FF-4120-918E-B5E1E94001CB v2
ANSI/IEEE C37.2
device number
-
-
-
Busbar protection REB650
Application manual
M13443-4 v9