ABB Relion 650 Series Applications Manual page 145

1MRK 505 287-UUS B
SwitchType is an enumeration according to IEC 61850-7-4 to indicate the switch type assigned to
SXSWI
10.2.4.3 Bay control (QCBAY)
If the parameter
accepted without any priority.
10.3 Interlocking
10.3.1 Identification
Function description
Logical node for interlocking
Interlocking for busbar grounding
switch
Interlocking for bus-section breaker
Interlocking for bus-section
disconnector
Interlocking for bus-coupler bay
Interlocking for 1 1/2 breaker
diameter
Interlocking for 1 1/2 breaker
diameter
Interlocking for 1 1/2 breaker
diameter
Interlocking for double CB bay
Interlocking for double CB bay
Interlocking for double CB bay
Interlocking for line bay
Interlocking for transformer bay
10.3.2 Application
The main purpose of switchgear interlocking is:
• To avoid the dangerous or damaging operation of switchgear
• To enforce restrictions on the operation of the substation for other reasons for example, load
configuration. Examples of the latter are to limit the number of parallel transformers to a
maximum of two or to ensure that energizing is always from one side, for example, the high
voltage side of a transformer.
Busbar protection REB650
Application manual
AllPSTOValid is set to No priority , all originators from local and remote are
IEC 61850
identification
SCILO
BB_ES
A1A2_BS
A1A2_DC
ABC_BC
BH_CONN
BH_LINE_A
BH_LINE_B
DB_BUS_A
DB_BUS_B
DB_LINE
ABC_LINE
AB_TRAFO
© Copyright 2013 ABB. All rights reserved
IEC 60617 ANSI/IEEE C37.2
identification device number
- 3
- 3
- 3
- 3
- 3
- 3
- 3
- 3
- 3
- 3
- 3
- 3
- 3
Section 10
Control
M16670-3 v4
GUID-60C7D24D-D202-46BD-B03E-B72CAAF0E352 v2
M13530-4 v3
139