ABB Relion 650 Series Applications Manual page 182

Section 10
Control
10.6 IEC61850 generic communication I/O functions DPGGIO
10.6.1 Identification
Function description
IEC 61850 generic communication
I/O functions
10.6.2 Application
The IEC61850 generic communication I/O functions (DPGGIO) function block is used to send three
logical outputs to other systems or equipment in the substation. The three inputs are named
OPEN, CLOSE and VALID, since this function block is intended to be used as a position indicator
block in interlocking and reservation station-wide logics.
10.6.3 Setting guidelines
The function does not have any parameters available in the local HMI or PCM600.
10.7 Single point generic control 8 signals SPC8GGIO
10.7.1 Identification
Function description
Single point generic control 8 signals
10.7.2 Application
The Single point generic control 8 signals (SPC8GGIO) function block is a collection of 8 single
point commands, designed to bring in commands from REMOTE (SCADA) to those parts of the
logic configuration that do not need complicated function blocks that have the capability to
receive commands (for example SCSWI). In this way, simple commands can be sent directly to the
IED outputs, without confirmation. Confirmation (status) of the result of the commands is
supposed to be achieved by other means, such as binary inputs and SPGGIO function blocks.
176
IEC 61850
identification
DPGGIO
IEC 61850
identification
SPC8GGIO
PSTO is the universal operator place selector for all control functions. Even if PSTO
can be configured to allow LOCAL or ALL operator positions, the only functional
position usable with the SPC8GGIO function block is REMOTE.
© Copyright 2013 ABB. All rights reserved
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
1MRK 505 287-UUS B
GUID-E16EA78F-6DF9-4B37-A92D-5C09827E2297 v2
SEMOD55391-5 v5
SEMOD55398-5 v4
SEMOD176456-2 v2
SEMOD176511-4 v3
Busbar protection REB650
Application manual