ABB Relion 650 Series Applications Manual page 207

1MRK 505 287-UUS B
Analog signals
Binary signals
ANSI09000337 V1 EN-US
Figure 101: Disturbance report functions and related function blocks
For Disturbance report function there are a number of settings which also influences the sub-
functions.
Three LED indications placed above the LCD screen makes it possible to get quick status
information about the IED.
Green LED:
Yellow LED:
Red LED:
Operation
The operation of Disturbance report function DRPRDRE has to be set
Disabled is selected, note that no disturbance report is registered, and none sub-function will
operate (the only general parameter that influences Sequential of events).
Operation = Disabled :
Busbar protection REB650
Application manual
A1-4RADR
Disturbance Report
A4RADR
Trip value rec
B1-6RBDR
Disturbance
recorder
B6RBDR
Sequential of
events
Event recorder
Indications
Steady light
Flashing light
Dark
Function controlled by SetLEDn
setting in Disturbance report
function.
Function controlled by SetLEDn
setting in Disturbance report
function.
© Copyright 2013 ABB. All rights reserved
DRPRDRE
ANSI09000337-1-en.vsd
In Service
Internal failure
No power supply
Enabled or Disabled . If
Section 12
Monitoring
M12179-82 v5
201