Installing The Interconnect Tray - HP Blade bc1000 Setup And Installation Manual

Installing and Cabling the HP CCI Solution

Installing the Interconnect Tray

4-2
Before installing the interconnect tray into the enclosure, you must
first purchase one as an option. The Integrated Administrator module
is included with the interconnect tray.
The procedure is the same for any interconnect tray.
To install the interconnect tray:
1. Press the purple-colored latch to release one hot-plug power
supply 1.
Purple color indicates hot-plug components.
2. Open the handle 2.
3. Slide the hot-plug power supply out of the enclosure 3.
Removing a hot-plug power supply
4. Repeat steps 1 through 3 to remove the other hot-plug power
supply.
www.hp.com Setup and Installation Guide