Proliant Bl E-Class Blade Enclosure Warnings And Cautions - HP Blade bc1000 Setup And Installation Manual

ProLiant BL e-Class Blade Enclosure Warnings
and Cautions
Å
Å
Å
Å
Setup and Installation Guide
Before installing the ProLiant BL e-Class blade enclosure, carefully
review the following warnings and cautions:
WARNING: To reduce the risk of personal injury or damage to
equipment, heed all warnings and cautions throughout the installation
instructions.
WARNING: A risk of injury or damage to the equipment from
hazardous energy is present. The access door provides access to
hazardous energy circuits. The door should remain locked during normal
operation or troubleshooting, or the system should be installed in a
controlled access location where only qualified personnel have access to
the system.
WARNING: To reduce the risk of electrical shock or damage to the
equipment:
• Only enter or perform service on specific parts of the HP CCI solution as
instructed in the user documentation.
• Do not disable the power cord grounding plugs. The grounding plugs are
an important safety feature.
• Plug both power cords into a grounded (earthed) electrical outlet that is
easily accessible at all times.
• Unplug the power cords from the power supplies to disconnect power to
the enclosure.
WARNING: To reduce the risk of personal injury from hot surfaces,
allow the internal system components to cool before touching them.
www.hp.com
Planning the Installation
3-3