HP Blade bc1000 Setup And Installation Manual page 119

Setup and Installation Guide
Use the following figure and table to determine the location and
function of the LEDs on the rear panel when the interconnect switch
is installed.
Rear panel LEDS with interconnect switch
Rear Panel LEDs with Interconnect Switch
Item LED
Power
1
supply power
Power supply
2
fault
Enclosure
3
power
www.hp.com
Status Description
Off = No power to the system
Blinking Standby, AC present
green =
Green = System power turned on
Off = Power supply OK
Amber = No AC power or over-voltage
or over-temperature
Blinking Current limit
amber =
Off = No power to enclosure
Amber = Enclosure shutdown; power
available; hibernate
Green = Enclosure power on
LEDs and Switches
E-3