HP Blade bc1000 Setup And Installation Manual page 109

Setup and Installation Guide
4. Check the monitor (installed to the Blade PC via the diagnostic
adapter) for the following messages that ensure that your Blade
PC meets the minimal hardware requirements and is powered up
during normal operations:
HP logo
Memory test
ROM information
Copyright information
Processor initialization
PXE initialization
Operating system initialization
You must install the optional graphics diagnostic card on the Blade
PC before using a monitor with the diagnostic adapter.
If the Blade PC completes POST and attempts to load the operating
system, go to the "Problems After Initial Boot"
appendix.
www.hp.com
Troubleshooting
section in this
D-15