Post Error Messages - HP Blade bc1000 Setup And Installation Manual

POST Error Messages

Code/Message
101-Option ROM
Checksum Error
102/103-System
Board Failure
162-System Options
Not Set
Setup and Installation Guide
Use POST error messages to assist in troubleshooting and performing
basic diagnostic functions. The following table lists the numeric
codes and text messages specific to Blade PCs.
Attempt the recommended actions in the order in which they are
listed.
Health LED Possible Cause
Red Blade system board has
failed.
Red Blade system board has
failed.
Amber CMOS was cleared or
the blade's battery has
failed.
www.hp.com
POST Error Messages
Recommended Action
1. Clear CMOS.
2. Flash the system ROM.
3. Replace the system
board.
1. Clear CMOS
2. Replace the system
board.
1. Reset the system time and
date in Computer Setup
(F10).
2. Replace the blade's RTC
battery.
C
C-1