HP Blade bc1000 Setup And Installation Manual page 111

Table D-10: Is the Power LED on the Blade PC Green?
Answer
No, it is off.
No, it is amber.
Yes.
Setup and Installation Guide
Possible Reasons
Blade PC is not seated properly.
Either the Blade PC or the Blade
PC bay is not functioning
properly.
The Blade PC is in a ready state
but is not powered on.
The Blade PC has failed.
If the power LED on the Blade PC is green, go to Table D-11.
www.hp.com
Possible Solutions
Remove Blade PC and re-install.
Determine whether the problem lies
with the Blade PC or with the
enclosure:
• Remove the Blade PC from the
enclosure, and insert it into a
different bay. If the power LED on
the Blade PC comes on and turns
green, the problem lies with the
original bay.
• If the power LED on the Blade PC
does not come on, try placing a
different Blade PC in the original
bay. If the power LED on the new
Blade PC comes on, the old
Blade PC may have failed.
• Contact HP or your authorized
service provider for replacement
parts and service.
Push the power button on the Blade
PC. If the Blade PC does not power
on, check the Integrated Administrator
for bay status and messages.
Replace the Blade PC. Contact HP or
your authorized service provider for
replacement parts and service.
Troubleshooting
D-17