Rear Panel; Cmos - HP Blade bc1000 Setup And Installation Manual

Rear Panel

CMOS

Setup and Installation Guide
Use the following figure and table to determine the location and
function of the buttons on the rear panel of the enclosure.
Enclosure rear panel buttons
Enclosure Rear Panel Buttons
Item Description
Enclosure UID
1
button
Enclosure power
2
button
Integrated
3
Administrator
reset button
The enclosure power and UID buttons are recessed. A non-metallic
tool, such as a pencil, may be needed to press these buttons.
Press the CMOS button (labeled SW50) on the Blade PC's system
board for 2 seconds to clear CMOS.
www.hp.com
On/Off Function
Activates the UID LED for easy enclosure
identification
Powers the enclosure and all Blade PCs up
or down
Restarts the Integrated Administrator
LEDs and Switches
E-11