Ä
Setup and Installation Guide
6. Compress the spring-loaded rack rail toward the rear of the
rack 1.
7. Using the marks you made when measuring with the template,
align the front of the right rail with the holes and release the rail,
allowing it to lock into position 2.
8. Engage the locking gear 3.
Inserting the front of the rack rail and engaging the locking gear
CAUTION: Rack rails must be installed as tightly as possible. Failure to
obtain a correct fit may result in damage to equipment.
Once the right rack rail is properly installed, install the left rack rail
using the same procedure.
www.hp.com
Installing and Cabling the HP CCI Solution
4-9