HP Blade bc1000 Setup And Installation Manual page 104

Troubleshooting
Table D-5: Is the Enclosure Health LED on the Front of the Enclosure On?
Answer
No, it is off.
Yes, it is amber.
Yes, it is red.
Yes, it is green.
D-10
Possible Reasons
The enclosure status cable is
disconnected from the center
wall assembly or the enclosure
status assembly.
The enclosure status assembly or
the center wall assembly is not
functioning properly.
A system component is degraded
but your system is still functional.
A system component has a
critical failure.
The Integrated Administrator has
not detected any degraded or
failed components.
www.hp.com
Possible Solutions
Securely attach the enclosure status
cable.
Contact HP or your authorized service
provider for parts and service.
Check your local or remote console
for error messages. Go to Table D-6.
Check system fans. Go to Table D-8.
Contact HP or your authorized service
provider for parts and service.
Check your local or remote console
for error messages. Go to Table D-6.
Check system fans. Go to Table D-8.
Contact HP or your authorized service
provider for parts and service.
Check your local or remote console
for error messages. Go toTable D-6.
Contact HP or your authorized service
provider for parts and service.
Setup and Installation Guide