Installing The Enclosure Into The Rack - HP Blade bc1000 Setup And Installation Manual

Installing and Cabling the HP CCI Solution

Installing the Enclosure into the Rack

4-10
The enclosure ships with two different sizes of thumbscrews:
Size 10-32 thumbscrews with white hexagonal washers, which
are compatible with Compaq-branded racks and some HP and
third-party racks
Size M6 thumbscrews with black hexagonal washers, which are
compatible with some third-party racks that require metric sizes
To replace a thumbscrew:
1. Pull the thumbscrew outward 1.
2. Unscrew the thumbscrew 2 while holding on to the hexagonal
washer.
3. Remove the thumbscrew and hexagonal washer 3.
Removing a thumbscrew and hexagonal washer
www.hp.com Setup and Installation Guide