HP Blade bc1000 Setup And Installation Manual page 31

Setup and Installation Guide
5. Press the interconnect tray release buttons 1.
6. Pull the blue ejector levers toward the rear of the enclosure 2.
Blue indicates internal touch point components.
Pulling the interconnect tray ejector levers
7. Insert the interconnect tray into the enclosure 1.
8. Rotate the interconnect tray levers to the locked position 2.
Inserting the interconnect tray and engaging the interconnect tray
levers (interconnect switch shown)
www.hp.com
Installing and Cabling the HP CCI Solution
4-3