HP Blade bc1000 Setup And Installation Manual page 19

Setup and Installation Guide
Advanced features that can detect and display Blade PCs
based on their physical rack, enclosure, and bay locations
The ability to set the deployment console to automatically
install pre-defined configurations on newly-installed Blade
PCs
For more information about Rapid Deployment Pack, refer to
your authorized reseller, the Rapid Deployment CD that ships
with the enclosure, or visit the HP website:
HP Systems Insight Manager
HP Systems Insight Manager provides in-depth fault, inventory,
and configuration management of HP server platforms (including
hundreds of Blade PCs) from a single console.
Diagnostics Utility
The Diagnostics Utility displays information about a Blade PC's
hardware and tests the system to ensure it is operating properly.
Automatic System Recovery-2 (ASR-2)
ASR-2 is a diagnostic/recovery feature that automatically restarts
the Blade PC in the event of a critical operating system failure.
Enclosure Self Recovery (ESR)
ESR, similar to ASR-2, is a self-monitoring reliability feature of
the Integrated Administrator. If the Integrated Administrator does
not boot or hangs during operation, ESR automatically resets the
Integrated Administrator for an attempted self-recovery. The
Blade PCs and interconnect tray are not affected by ESR.
Integrated Management Log (IML)
The IML provides a detailed log of key system events. This log,
which also monitors the health log, is accessible by utilities,
including HP Systems Insight Manager.
ROMPaq
ROMPaq enables you to upgrade the firmware (BIOS) with
system or option ROMPaq utilities.
www.hp.com
HP CCI Solution Technology
www.hp.com
2-9