HP Blade bc1000 Setup And Installation Manual page 98

Troubleshooting
Ä
D-4
8. If the Integrated Administrator is rebooting repeatedly, be sure
that it is not rebooting due to a problem that initiates an Enclosure
Self Recovery (ESR) reboot.
Refer to the following sections in the HP ProLiant BL e-Class
Integrated Administrator User Guide on the Documentation CD
that ships with your enclosure:
"Enclosure Self Recovery"
"System Short Circuit" for other continuous rebooting
problems
9. Restart the enclosure by pressing the enclosure power button on
the fan cage on the rear of the enclosure.
CAUTION: Pressing the enclosure power button while the enclosure is
running shuts down the enclosure and all Blade PCs.
IMPORTANT: If the enclosure does not restart, proceed to "Table D-1:
Enclosure Diagnostic Steps" in this appendix.
10. Be sure that connectors and components are seated properly.
Refer to the "General Loose Connections" section in the Servers
Troubleshooting Guide on the Documentation CD that ships with
your enclosure.
www.hp.com Setup and Installation Guide