HP Blade bc1000 Setup And Installation Manual page 107

Table D-8: Is the Fan Health LED Green?
Answer
No, it is off.
No, it is red.
No, it is amber.
Yes, it is green.
Setup and Installation Guide
Possible Reasons
The fan cable or connectors are
not properly connected.
The Integrated Administrator
module is not properly seated.
At least two fans have failed or
are not properly seated. You no
longer have adequate cooling.
At least one redundant fan has
failed. Your system still has
adequate cooling, but is no
longer redundant.
All fans are functional.
www.hp.com
Possible Solutions
Be sure that the connectors on the fan
cable are properly seated and not
damaged.
Contact HP or your authorized service
provider for parts and service.
Open the fan cage and look for
amber LEDs to determine which fans
have failed. Replace all failed fans.
Contact HP or your authorized service
provider for parts and service.
Contact HP or your authorized service
provider for parts and service.
Check your local or remote console
for error messages. Go to table D-6.
If these steps have not identified the
problem, contact HP or your
authorized service provider for
assistance.
Troubleshooting
D-13