Powering Down The Enclosure - HP Blade bc1000 Setup And Installation Manual

Ä

Powering Down the Enclosure

Ä
Setup and Installation Guide
Powering down the Blade PC
To perform an emergency shut down of a Blade PC, press and hold
the blade power button for four seconds.
CAUTION: Performing an emergency shutdown on a Blade PC may
result in the loss of any unsaved data.
To perform a graceful shutdown of the enclosure and all the Blade
PCs, press the enclosure power button. If your operating system is
Microsoft Windows XP, the enclosure automatically performs a
graceful shutdown of all Blade PCs, and then removes power from
the enclosure.
To perform an emergency shut down of the enclosure and all Blade
PCs at the same time, press and hold the enclosure power button for
four seconds.
CAUTION: Performing an emergency shutdown on the enclosure may
result in the loss of any unsaved data on all Blade PCs.
www.hp.com
Installing and Cabling the HP CCI Solution
4-23