Setup and Installation Guide
6. Install the Blade PC in the enclosure. See the
PC"
section in
Chapter 4, "Installing and Cabling the HP CCI
Solution."
7. Power up the Blade PC. See the
Solution"
section in
CCI Solution."
8. Run the Computer Setup (F10) Utility to reconfigure the Blade
PC with the new battery. See the
section in
Chapter 5, "Deployment and Management."
www.hp.com
"Powering Up the HP CCI
Chapter 4, "Installing and Cabling the HP
"Computer Setup (F10) Utility"
Blade PC Battery
"Installing a Blade
G-3