Blade Pc Diagnostic Steps - HP Blade bc1000 Setup And Installation Manual

Troubleshooting

Blade PC Diagnostic Steps

Table D-9: Blade PC Diagnostic Steps
Question
Question 1: Is the power LED on the Blade PC
green?
Question 2: Is the health LED on the Blade PC
green?
Question 3: Is the NIC 1 or NIC 2 LED on the
Blade PC illuminated?
Question 4: Is the monitor displaying information
when connected to the Blade PC through the
diagnostic adapter?
D-16
If your Blade PC does not start, or powers up but does not complete
POST, answer the questions in Table D-9 to determine appropriate
actions based on the symptoms observed.
According to the answers you give, you are directed to the appropriate
table in the section that immediately follows. That table outlines
possible reasons for the problem, options available to assist in
diagnosis, and possible solutions.
www.hp.com
Action
If yes, continue to Question 2 of this table.
If no, see Table D-10.
If yes, continue to Question 3 of this table.
If no, see Table D-11.
If yes, continue to Question 4 of this table.
If no, see Table D-12.
If yes, use the POST messages for further
diagnosis, or continue to Table D-14.
If no, see Table D-13.
Setup and Installation Guide