Installing The Rack Rails - HP Blade bc1000 Setup And Installation Manual

Installing the Rack Rails

Setup and Installation Guide
1. Measure the depth of your rack.
2. Be sure that the rail locking gear is in the unlocked position 1.
3. Press the rail locking tab to unlock the rack rail 2.
4. Adjust the rack rail to the depth of the rack using the numbers on
the rack rail as a guide 3. The depth of a Compaq branded rack
(29 inches) is clearly indicated on the rack rails.
Unlocking and adjusting a rack rail
IMPORTANT: Numbers on the rack rail provide a gross adjustment of
the depth of the rack. The rack rail may need to be tightened to ensure
proper fit.
www.hp.com
Installing and Cabling the HP CCI Solution
4-7