Register Map For Exl10/Xl10 Prime Ocs I/O - HORNER APG XL10 PRIME OCS User Manual

6.3

Register Map for EXL10/XL10 PRIME OCS I/O

Registers
no I/O
%I1-%I12 Unused
%I13-%I16 Unused
%I17-%I24
%I25-%I29
%I30-%I31 Unused
%I32
%Q1 Unused
%Q1-%Q6 Unused
%Q7-%Q12 Unused
%Q13-%Q16 Unused
%Q17-%Q20 Unused
%Q21-%Q24 Unused
%AI1-%AI4 Unused
%AI33 - %AI38
%AQ1-%AQ8
%AQ9-%AQ10
*Electronic Short Circuit Protection [ESCP]
NOTE: The ESCP bit is set high when the output current is too high, and the output driver has shut down
for thermal protection. This typically happens when outputs are shorted, or they are driving loads that
are higher than the output rating.
J u l y 6 , 2 0 2 2
Table 6.4 – I/O Register Map
102 I/O
Reserved
Unused
Unused
Unused
Reserved
Reserved
Analog Inputs
Unused
Unused
Unused = These registers can be used as general-purpose registers
Description
103 I/O 104 I/O
Digital Inputs
Digital Inputs
Reserved Digital Inputs
PWM Table (Below)
PWM Table (Below)
Digital Outputs
Digital
Outputs
Link: HSC Table
Reserved
%AI1 - %AI2 for Analog Input Channels
%AI3 - %AI4 - Unused
Unused
MAN1029-10-EN_EXL10_XL10P_UM
105 I/O
Reserved
Reserved
Reserved
ESCP Alarm*
Digital Outputs
Reserved
PWM Table (Below)
Analog Outputs
P a g e 57 | 195
106 I/O
Mirror of first
four analog
channels.
Analog Inputs
-for all 6
channels