Chapter 23: Maintenance; Firmware Updates; How To Check For Current Firmware Revision - HORNER APG XL10 PRIME OCS User Manual

CHAPTER 23:

23.1 Firmware Updates

The EXL10/XL10 PRIME OCS products contain field updatable firmware to allow new features to be added
to the product at a later time. Firmware updates should only be performed when a new feature or
correction is required.
Warning: Firmware updates should only be performed when the equipment being controlled by the
XL10/XL10 PRIME OCS is in a safe, non-operational state. Communication or hardware failures during
the firmware update process can cause the controller to behave erratically resulting in injury or
equipment damage. Make sure the functions of the equipment work properly after a firmware update
before returning the device to an operational mode.

23.2 How to Check for Current Firmware Revision

To check the firmware revision on a controller, open System Menu → View Status.
J u l y 6 , 2 0 2 2
MAINTENANCE
MAN1029-10-EN_EXL10_XL10P_UM
P a g e 183 | 195