Audio Config Details - HORNER APG XL10 PRIME OCS User Manual

The following dialog will open.

15.3 Audio Config Details

Triggers – Set the trigger bit high to play the audio file. NOTE: The bit needs to be left on to continue
playing. The bit will be set to low after the file is finished laying.
Status – This register gives the status of the audio files, see table below.
st
1 Status Register
nd
2 Status Register
J u l y 6 , 2 0 2 2
Figure 15.1 - Audio Config Dialog
Table 15.1 - 1st and 2nd Status Registers
Bit Number
Bit 1 to Bit 8
Bit 9
Bits 10-16
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bits 11-16
MAN1029-10-EN_EXL10_XL10P_UM
Description
Volume Control (0-100)
Play Control (1=Pause, 0=Play)
Not Used
Cannot open ALSA Lib
Cannot open MP3 Lib
Audio output device cannot be setup
Cannot open input Audio Stream
Memory allocation failed
Buffer is not free
Write Fail
Short Write
Recover Error
Filename Error
Not Used
P a g e 142 | 195