Enable Autorun And Autoload - HORNER APG XL10 PRIME OCS User Manual

5.16 Enable AutoRun and AutoLoad

"Enable AutoRun" displays the following options which can be selected:
Enable AutoRun
"Enable AutoLoad" displays the following options which can be selected:
Enable AutoLoad
J u l y 6 , 2 0 2 2
No = OCS will be in IDLE mode after AutoLoad or Automatic Restore.
Yes = OCS will automatically be placed into RUN mode after AutoLoad or
Automatic Restore.
No = Does not load AUTOLOAD.PGM automatically when application
program is absent or corrupted.
Yes = Loads AUTOLOAD.PGM file automatically from RM when application
program is absent or corrupted.
MAN1029-10-EN_EXL10_XL10P_UM
P a g e 43 | 195