View Status - HORNER APG XL10 PRIME OCS User Manual

5.4

View Status

The View Status Sub-Menu displays up to 19 System Settings. Only the OCS Mode System Setting is
editable.
XW1yz= Model number of this EXL10/XL10 PRIME OCS unit
Model 1yz = indicates the installed I/O module
00 = no I/O module
Idle = EXL10/XL10 PRIME OCS is in Idle mode
OCS Mode DoIO = EXL10/XL10 PRIME OCS is in Do I/O mode
Run = EXL10/XL10 PRIME OCS is in Run mode
0.0 = EXL10/XL10 PRIME OCS is not in Run mode
Scan Rate(mS)
0.1 to 999.9= Average number of mS for each ladder scan
0.0 to 100.0 = CAN network bandwidth % used by this EXL10/XL10 PRIME OCS
OCS Net Use %
node
All Net Use % 0.0 to 100.0 = CAN network bandwidth % used by all nodes
Ladder Size x = Number of bytes in application ladder program
Config Size x = Number of bytes in application I/O configuration
Graphics Size x = Number of bytes in application graphic screens
String Size x = Number of bytes in application string table
Bitmap Size x = Number of bytes in application bitmaps
Text Tbl Size x = Number of bytes in application text tables
Font Tbl Size x = Number of bytes in application font tables
Protocol Size x = Number of bytes in application downloaded protocols
SMS File Size x = Number of bytes in application SMS protocol configuration
Firmware Rev xx.yy = Current firmware version
OS Ver a.b.cd.yz = Current Operating System version
FPGA Rev x.y = Current FPGA version (High-Speed I/O Sub System)
InitRD Rev x.yz = Bootloader version
J u l y 6 , 2 0 2 2
MAN1029-10-EN_EXL10_XL10P_UM
P a g e 30 | 195