Screen Navigation - HORNER APG XL10 PRIME OCS User Manual

MAN1029-10-EN_EXL10_XL10P_UM

14.4 Screen Navigation

To allow the operator to change screens, a screen jump object is generally used. This object may be
visually represented as a 3-D button (responding to touch) or remain invisible and logically tied to an OCS
register. An optional system ICON may be configured for display along with the legend, which aids in
identifying the object as one that causes a screen change (shown below in Figure 14.3)
Screen jumps can also be triggered on other keys or based on control logic for more advanced
applications. To allow the operator to change screens, a screen jump object is generally used. This
object may be visually represented as a button (responding to touch) or remain invisible and logically
tied to an OCS register. An optional system ICON may be configured for display along with the legend,
which aids in identifying the object as one that causes a screen change.
Screen Jump Object
Figure 14.3 – Typical Screen Jump Object
J u l y 6 , 2 0 2 2 P a g e 131 | 195