Chapter 12: Ethernet Communication; Ethernet Overview; Ethernet Module Protocols And Features; Ethernet System Requirements - HORNER APG XL10 PRIME OCS User Manual

CHAPTER 12:

12.1 Ethernet Overview

The EXL10/XL10 PRIME controller supports the following:
1. Downloadable Protocols
a. Modbus Client
2. ETN300 Protocols
a. ICMP (Ping)
b. EGD
c. Modbus Slave
d. Ethernet I/P
e. FTP
f. ASCII over TCP/IP
3. Supports a maximum of 4 WebMI simultaneous connections
4. Ethernet SmartRail

12.2 Ethernet Module Protocols and Features

The following table describes the Ethernet Module Protocols and features supported by the two Ethernet
ports on the EXL10/XL10 PRIME.
Protocol / Feature
ICMP (Ping)
EGD
SRTP Slave (90-30 Service
Request)
CsCAN TCP Server
Modbus Slave
Ethernet / IP
FTP (File Server)
ASCII over TCP/IP
NTP Protocol
HTTP (Web Server)

12.3 Ethernet System Requirements

Full Ethernet functionality requires:
- PC running Cscape Programming Software Version 9.3 SP6 or later (for configuration).
- EXL10/XL10 PRIME controller with onboard Ethernet port.
J u l y 6 , 2 0 2 2
ETHERNET COMMUNICATION
Table 12.1 – Ethernet Module Protocols & Features
Internet Control Message Protocol
Ethernet Global Data
Service Request Transfer Protocol
Horner APG CsCAN over Ethernet (for Cscape to OCS programming)
Modbus over Ethernet
ODVA CIP over Ethernet
File Transfer Protocol
ASCII Data over Ethernet
Network Time Protocol (Obtain clock from web-based server)
Hypertext Transfer Protocol (Web Server)
MAN1029-10-EN_EXL10_XL10P_UM
Protocol / Feature Description
P a g e 113 | 195