Chapter 22: Xl10 Prime Back Up Battery - HORNER APG XL10 PRIME OCS User Manual

MAN1029-10-EN_EXL10_XL10P_UM

CHAPTER 22: XL10 PRIME BACK UP BATTERY

NOTE: For XL series controller battery information (not the Prime series) please refer to the chapter
above.
The XL10 Prime has an improved memory architecture that does not require a battery for program or
register retention. The onboard lithium coin-cell battery runs the real time clock and is user replaceable
with an expected lifetime of seven (7) to ten (10) years. Environmental conditions, including extreme
temperatures and humidity, can affect battery life. If the battery older than seven (7) to ten (10) years
old, it is recommended that it be replaced as preventative maintenance. NOTE: Use only the proper
battery type listed.
NOTE: Use only the proper battery type listed.
WARNING: DO NOT USE IF BATTERY IS LEAKING OR HAS BEEN DAMAGED.
WARNING: LITHIUM BATTERIES MAY EXPLODE OR CATCH FIRE IF MISTREATED.
DO NOT RECHARGE, DISASSEMBLE, HEAT ABOVE 100° C (212° F) INCINERATE, OR PUNCTURE.
WARNING: EXPLOSION HAZARD – BATTERIES MUST BE ONLY BE CHANGED IN A AREA KNOWN TO BE
NON-HAZARDOUS.
WARNING: Disposal of lithium batteries must be done in accordance with federal, state, and local
regulations. Be sure to consult with the appropriate regulatory agencies before disposing batteries. In
addition, do not recharge, disassemble, heat or incinerate lithium batteries.
WARNING: Do not make substitutions for the battery. Be sure to only use the authorized part number
to replace the battery.
J u l y 6 , 2 0 2 2 P a g e 181 | 195