Register Map For Exl10 Ocs I/O - HORNER APG EXL10 OCS User Manual

Register Default I/O Name
%SR220-222
For additional information on system bits and registers, refer to the online help found in Cscape.
6.3

Register Map for EXL10 OCS I/O

Registers
EXL10 with
no I/O
%I1-%I12 Unused
%I13-%I16 Unused
%I17-%I24
%I25-%I29
%I30-%I31 Unused
%I32
%Q1 Unused
%Q1-%Q6 Unused
%Q7-%Q12 Unused
%Q13-%Q16 Unused
%Q17-%Q20 Unused
%Q21-%Q24 Unused
%AI1-%AI2 Unused
%AI33 - %AI38
%AQ1-%AQ8
%AQ9-%AQ10
*Electronic Short Circuit Protection [ESCP]
NOTE: The ESCP bit is set high when the output current is too high, and the output driver has shut down
for thermal protection. This typically happens when outputs are shorted, or they are driving loads that
are higher than the output rating.
t h
A p r i l 2 4 , 2 0 2 0
Table 6.3 – %SR Registers – Master %SR Table
Description
(XLE/XLT, X2, X4, & X7 use %SR101 &
%SR108-112 for WebMI License Details)
Expiration Date of WebMI License, license
detail.
(XLE/XLT, X2, X4, & X7 use %SR101 &
%SR108-112 for WebMI License Details)
Table 6.4 – I/O Register Map
EXL10with
102 I/O
Reserved
Unused
Unused
Unused
Reserved
Reserved
Unused
Unused
Unused = These registers can be used as general purpose registers
MAN1029-08-EN_EXL10_UserManual
Min-Max
Values
Description
EXL10 with EXL10 with
103 I/O 104 I/O
Digital Inputs
Digital Inputs
Reserved Digital Inputs
PWM Table (Below)
PWM Table (Below)
Digital Outputs
Digital
Outputs
HSC Table (Below)
Reserved
HSC Table (Below)
Unused
PWM Table (Below)
Program
(Read/Write)
Read Only
EXL10 with
105 I/O
Reserved
Reserved
Reserved
ESCP Alarm*
Digital Outputs
Reserved
Analog Outputs
P a g e 55 | 191
Display
(Read/Write)
Read Only
EXL10 with
106 I/O
Analog Inputs