Digital / Hsc Input Configuration - HORNER APG XL10 PRIME OCS User Manual

7.5

Digital / HSC Input Configuration

The following figure illustrates the Digital / HSC Input Configuration dialog.
The Active mode group box allows the user to select if inputs are active high (Positive logic) or active low
(Negative logic). It is important that this setting match what the jumper settings are on the hardware.
The High-Speed Counters group box contains all of the windows that are used for configuring the 4
available high-speed counters on the EXL10/XL10 PRIME OCS. In configuring a counter, the user needs to
set the type, mode, and counts per rev.
The type drop down includes the following options:
Disabled
-
Frequency Measurement
-
Period Measurement
-
Totalize
-
Pulse Width Measurement
-
Quadrature
-
J u l y 6 , 2 0 2 2
Figure 7.7 – Digital / HSC Input Configuration Dialog
MAN1029-10-EN_EXL10_XL10P_UM
P a g e 69 | 195