Battery Charging Status - HORNER APG XL10 PRIME OCS User Manual

21.6 Battery Charging Status

Viewed in the System Menu under "View Battery Status" or read as a numeric value in %SR196.
The battery temperature, Tb, is equal to the CPU temperature minus 30°C: Tb = CPU° - 30°C.
State - Name
%SR196
0 Final Charge to 4.2V
1 Normal Charging
2 Hot Charging
3 Battery Won't Charge
4 Battery Too Hot
5 Cold Charging
6 Battery Too Cold
7 Error No Battery
8 Final Charge to 4.1V
10 Error: Voltage Too Low
11 Waiting
12 Wait Discharging
J u l y 6 , 2 0 2 2
Table 21.1 – Charging State Table
Description
The battery is fully charged
Battery is fast charging
Tb: 11-45°C
Battery is slow charging
Tb: 45-60°C
Battery has not completed charging
in 8/40 hours
Not Charging
Tb: > 60°C
Battery is slow charging
Tb: 0-10°C
Not Charging
Tb: < 0°C
No battery was detected at power
up. It will not attempt to charge until
the next power cycle.
The battery has fully charged to 4.1V
in Hot Charging mode.
The battery voltage was too low at
power up. It will not attempt to
charge until the next power cycle.
Make sure a proper battery is
installed.
The unit has powered up and is
waiting 2 minutes before attempting
to charge.
The battery has been charged and
the system is waiting for the voltage
to drop before charging again.
MAN1029-10-EN_EXL10_XL10P_UM
Additional Information
Next step, State 12 – Wait
Discharging
@100mA to 4200mV
Up to 8 hrs charge time
@20mA to 4100mV
Up to 40 hrs charge time
Charging is suspended for 5
minutes and then tried again.
Charging cycle resumes when
battery temperature falls to 60°C
or less.
@20mA to 4200mV
Up to 40hrs charge time
Charging cycle resumes when
battery temperature climbs to 0°C
or greater.
%SR55.13 = ON
4.1V is maintained until Normal
or Cold charging can execute.
%SR55.13 = ON
After 2 minutes, charging begins
even if the battery is fully
charged.
Charging resumes when battery
voltage has dropped below
4000mV.
P a g e 176 | 195