Analog Output Configuration - HORNER APG XL10 PRIME OCS User Manual

7.8

Analog Output Configuration

The following figure illustrates the Analog Output Configuration dialog. To open the I/O configuration
dialogs, select Controller → Hardware Configuration → Local I/O → Config
(top button) → Module Setup.
The Output value on Stop group box contains items that allow the user to specify how the analog output
channels behave when the controller is stopped. The outputs can either hold their value or default to a
value when the controller is stopped.
The Output Mode group box allows the user to select the operating modes for each of the analog outputs.
The modes include the following:
0..10V
-
0..20mA
-
4..20mA
-
J u l y 6 , 2 0 2 2
Figure 7.10 – Analog Output Configuration Dialog
MAN1029-10-EN_EXL10_XL10P_UM
P a g e 72 | 195