Load Clone - HORNER APG XL10 PRIME OCS User Manual

18.3 Load Clone

This option loads the application, all unit settings and register values from Removable media to the
battery-backed RAM (Regardless of AutoLoad settings) and then resets the OCS for the settings to take
effect.
User needs to perform the following to Load Clone:
1. Select "Clone Unit" from main System Menu of OCS as shown below:
2. Selecting "Clone Unit" menu will open the following menu screen. Select "Load Clone".
J u l y 6 , 2 0 2 2
Figure 18.6 – System Menu
Figure 18.7 – Clone Unit Menu after Cloning
MAN1029-10-EN_EXL10_XL10P_UM
P a g e 161 | 195